DynaFlow Jumbo Junior+
Place Jumbo Junior+ on a flat surface. Lift the jumbo bag & bring above the Jumbo Junior+ at convenient location.
Lower the jumbo bag onto the Jumbo Junior+, It will penetrate the jumbo bag completely. Then raise the bag again.
Pull down the Jumbo Junior+ slightly with rotating motion so that it locks inside the jumbo bag.
Jumbo Junior+ is ready to operate. Open and close the valve to avail desired flow of material.
Free the discharge spout by unlocking the first knot and insert Jumbo Junior+ from the bottom.
Place and Lock the Metal clamp on the Jumbo Junior+so that it overlaps and sits on the wedges.
Fabric of discharge spout is perfectly fixed between the clamp and Jumbo Junior+ open the second knot to allow material in the Dispenser. Operate the valve to avail desired flow of material.
DynaFlow Jumbo Junior+
Body material | Engineering plastic |
---|---|
Fastener material | Stainless Steel |
Avg. material flow | 150 to 650 kg / minute (Depending on density) |
Dimensions | 45 cm X 22 cm X 22 cm |
Weight | 2020 g |
Country of origin | India |
Reinforced sharp tip for easy penetration of FIBC Bag.
Flexible handle with ergonomic design.
Rugged hardware for strength and stability.
Precisely shaped wedges for locking clamp to provide maximum grip with fabric of unloading spout.
Zinc cladded clamp with easy lock for attachment with unloading spout.
54, Jay Industrial Park, Nr. Nana Chiloda Circle, Off S.P. Ring Road, Muthiya, Ahmedabad – 382330, Gujarat, India.